Newbie Bluepill Blinking sample code

Share code examples or discuss embedded software, including device drivers, interrupt handlers, middleware and application code.

Moderators: Markus Girdland, Mattias Norlander

Posts: 1
Joined: Sat Aug 18, 2018 9:12 am

Newbie Bluepill Blinking sample code

Postby clicking » Sat Aug 18, 2018 11:57 am


I am a newbie on Atollic and STM32. Today I have got my Bluepill and STLINKv2. I have installed both Atollic and CubeMX. Now I am looking for a sample blinking project for onboard PC13 LED. Please help me where can i get it?

Mattias Norlander
Posts: 265
Joined: Fri Apr 29, 2016 10:01 am

Re: Newbie Bluepill Blinking sample code

Postby Mattias Norlander » Fri Aug 31, 2018 2:49 pm


Dont know really. Never tried this board. If you search the forum you will find this thread: viewtopic.php?t=1176#p2401
Maybe someone can help you there. Since ST does not produce this board they will not provide any example projects.
If I were you I would downloads STM32CubeMx and create a project for that MCU (STM32F103C8?).
To be able to do so STM32CubeMx will need to download the STM32CubeF1 firmware package which contains the HAL libraries necessary to easily blink a LED. In this package which will by default be downloaded to your user folder you should be able to find some examples (but not for BluePill):

The board with the most similarity to BluePill in the CubeFW_F1 package (at least in v.1.6.1 which may be old) is probably the NUCLE-F103RB.

So create a project in CubeMx then steal some code or at least glance at the code in that folder to understand the API.

Posts: 1
Joined: Mon Dec 31, 2018 7:57 am

Re: Newbie Bluepill Blinking sample code

Postby tomwade » Mon Dec 31, 2018 8:09 am

The code where it needs to understand the part which will be going to manage the part for such a way to keep the following part that will be able to manage the process so Epson printer not printing will analyze the valuable part.

Posts: 10
Joined: Sat Jan 05, 2019 1:48 am

Re: Newbie Bluepill Blinking sample code

Postby didier9 » Sat Jan 05, 2019 7:29 pm

I just uploaded a small Bluepill project there:
Good luck!

Posts: 8
Joined: Sun Jan 06, 2019 11:17 am

Re: Newbie Bluepill Blinking sample code

Postby sami » Sun Jan 06, 2019 11:27 am

Please, try my example. with CMSIS+SPL. inside empty project, but add data to blinck led at pc13 pill.

Posts: 1
Joined: Tue Jan 08, 2019 9:37 am

Re: Newbie Bluepill Blinking sample code

Postby alanperker » Tue Jan 08, 2019 9:52 am

This is very helpful

Return to “Embedded target code development discussions”

Who is online

Users browsing this forum: No registered users and 2 guests